The Ford Barn - View Single Post

rich b · 09-08-2020, 01:03 AM

If you go the '36 rear mount; you also need to remove the later frame bracket and install the earlier frame brackets.

It may be easier to fabricate a bracket for the '36 lever that bolts to the top cover bolts on the transmission. A Model A mount (toothed strip) will fit the '36 lever and is more adaptable as it mounts flat with two bolts.

09-08-2020, 01:03 AM	#7
rich b Senior Member Join Date: May 2010 Location: Minnesota Posts: 1,825	Re: 1936 vs 1937 Emergency Brake Lever If you go the '36 rear mount; you also need to remove the later frame bracket and install the earlier frame brackets. It may be easier to fabricate a bracket for the '36 lever that bolts to the top cover bolts on the transmission. A Model A mount (toothed strip) will fit the '36 lever and is more adaptable as it mounts flat with two bolts.