The Ford Barn - View Single Post - Two tooth steering box lower race removal

john charlton · 09-25-2019, 01:47 PM

Heat the housing with a propane or butane torch until it is fairly hot then dunk it in cold water . This normally does the trick then use the drift trough the two holes .

John in same place and same wet weather Suffolk County England .

09-25-2019, 01:47 PM	#4
john charlton Senior Member Join Date: May 2010 Posts: 1,304	Re: Two tooth steering box lower race removal Heat the housing with a propane or butane torch until it is fairly hot then dunk it in cold water . This normally does the trick then use the drift trough the two holes . John in same place and same wet weather Suffolk County England .