Re: Oil Filter
CarlG;
I use the full flow filter that I purchased from Mike's several years ago. I works fine and has the advantage (I guess) of passing all of the oil through the filter before it goes into the galley.
It is a bit of a nuisance to install and also when you adjust valves. It's not a big issue, just tricky.
I don't know if it's better than the bypass filter. I do have higher than normal oil pressure (about 4 psi at 45 mph) and I wonder if the filter is restricting flow and causing the pressure to go up a bit. I don't think that any restriction in the flow is a good thing for a Model A engine. Having said that I have had no problems with my motor.
I think that either is OK.
Dick
|