Thread
:
throttle control
View Single Post
09-28-2020, 01:20 PM
#
3
Brentwood Bob
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,247
Re: throttle control
I have had good luck cold bending the arm at the carb.
If you have a 2tooth column it can be shifted by loosening the clamps, but if it was me I would bend the arm at the carb.
Brentwood Bob
View Public Profile
Send a private message to Brentwood Bob
Find More Posts by Brentwood Bob