View Single Post
Old 08-28-2020, 06:59 AM   #19
KGBnut
Senior Member
 
KGBnut's Avatar
 
Join Date: Jul 2011
Location: Southwestern Connecticut
Posts: 931
Default Re: Designing an Emergency Electrical Circuit

I maybe the oddball out there, but my daily driver still has the original wiring harness. I inspected it thoroughly before I put her on the road and recheck things now and again. I've had very few problems. I did install a battery shutoff, a main fuse at the starter, and a second fuse block under the dash. Any accessories I have added (cabin lights, USB charger, etc...) go through the fuse block.

Keep in mind, if you do install a new wiring harness, I have heard many complaints about the connector for the light switch at the bottom of the steering column. Many people will remove that connector from the new harness and solder in the original connector.

Good luck,

Ken
__________________
Style beats speed any day, and with a lot fewer tickets.
KGBnut is offline   Reply With Quote