The Ford Barn - View Single Post

rotorwrench · 03-25-2018, 10:32 AM

Vac VPs recommendations are .060" to .080. Here is a link.
https://www.fordbarn.com/forum/showt...3599&showall=1

The grooves in the tapered face also need to be there. Some repros are smooth and they need those grooves. Slot dimensions have to be good as well. Some of the new stuff is crap.

03-25-2018, 10:32 AM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,440	Re: Synchro Ring Clearances Vac VPs recommendations are .060" to .080. Here is a link. https://www.fordbarn.com/forum/showt...3599&showall=1 The grooves in the tapered face also need to be there. Some repros are smooth and they need those grooves. Slot dimensions have to be good as well. Some of the new stuff is crap.