The Ford Barn - View Single Post

28fordor · 08-04-2021, 10:20 PM

Thank you, greatly appreciate the responses. I think I have solved the issue as I discovered that the steering arm was inserted in the stub axle at an angle. Currently rebuilding drag link and tie rod so time will tell. 29 Touring - thank you for the measurement which is something I have been unable to find up to date. Brent, sorry about the long sentences bu needed to describe the problem as i saw it.

Cheers

Kevin

08-04-2021, 10:20 PM	#13
28fordor Junior Member Join Date: Jul 2010 Location: Mornington Peninsula Australia Posts: 3	Re: 7 tooth steering problem Thank you, greatly appreciate the responses. I think I have solved the issue as I discovered that the steering arm was inserted in the stub axle at an angle. Currently rebuilding drag link and tie rod so time will tell. 29 Touring - thank you for the measurement which is something I have been unable to find up to date. Brent, sorry about the long sentences bu needed to describe the problem as i saw it. Cheers Kevin