The Ford Barn - View Single Post

TomO · 07-09-2020, 10:08 AM

You probably have the wrong type solenoid. Check for 6 volts (6 volt system) at the button (center) terminal, if you have 6 volts there, you have the correct solenoid. If you have less than 5 volts there, you have the wrong or bad solenoid.

My guess is that you have a solenoid that requires voltage to the button terminal in order to work. This requires a 2 terminal dash button.

07-09-2020, 10:08 AM	#4
TomO Senior Member Join Date: May 2010 Posts: 362	Re: 39 starter circut You probably have the wrong type solenoid. Check for 6 volts (6 volt system) at the button (center) terminal, if you have 6 volts there, you have the correct solenoid. If you have less than 5 volts there, you have the wrong or bad solenoid. My guess is that you have a solenoid that requires voltage to the button terminal in order to work. This requires a 2 terminal dash button. __________________ TomO