Quote:
Originally Posted by Brendan1959
What sort of hone are you using? I did not think you could go up a size with just a hone, not criticizing, it is the sort of thing I would like to do.
Brendan
|
I used a micrometer hone and bore dial indicator. Works pretty slick but patience are required. I won't be volunteering to do a V16 anytime soon
. 5" stones that alley equal pressure over their entire length. Once you remove the taper it's just a matter of honing until you get your desired bore size. I used a HD Makita 1/2" drill and would get .001-.002 before have to quit to let the drill cool. Tedious job but satisfying when it's done.
https://www.amazon.ca/Lisle-LI15000-...24085560&psc=1