The Ford Barn - View Single Post - The Terry Burtz 5 main bearing engine blocks are back on track.

oldpete · 06-14-2021, 08:18 PM

Thanks for the info Dennis, I have just about finished assembling my new engine, I am using the Stipe oil pump with the 35-40psi pressure relief spring. Unfortunately Scat will not send parts to Australia as our government want them to collect and remit a goods & services tax. What I have done is install an adjustable needle valve with a tee piece splitting the main oil return pipe out of the oil filter diverting any excess oil pressure into the side plate, sorry I cannot attach a photo, too dam hard.

06-14-2021, 08:18 PM	#357
oldpete Junior Member Join Date: May 2018 Posts: 8	Re: The Terry Burtz 5 main bearing engine blocks are back on track. Thanks for the info Dennis, I have just about finished assembling my new engine, I am using the Stipe oil pump with the 35-40psi pressure relief spring. Unfortunately Scat will not send parts to Australia as our government want them to collect and remit a goods & services tax. What I have done is install an adjustable needle valve with a tee piece splitting the main oil return pipe out of the oil filter diverting any excess oil pressure into the side plate, sorry I cannot attach a photo, too dam hard.