The Ford Barn - View Single Post

Clem Clement · 06-04-2021, 05:04 PM

My Friend Bruce Metcalf made a visit here today before the storm. We find that the shaft with the bolt on the on the bottom wobbles in its mounting. It looks like it doesn't allow the edge of the disk to get in position We used one of the photos you guys provided to be sure the disk was right-side up. Thanks Bruce. Golly that was a fun flogging an old Ford. Someone have an extra disk, please. Thanks for all your advise on this challenge. At the moment I have a matching-color bungee holding the hood nose down in place.

06-04-2021, 05:04 PM	#17
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,397	Re: 1939 pickup hood latch assembly question My Friend Bruce Metcalf made a visit here today before the storm. We find that the shaft with the bolt on the on the bottom wobbles in its mounting. It looks like it doesn't allow the edge of the disk to get in position We used one of the photos you guys provided to be sure the disk was right-side up. Thanks Bruce. Golly that was a fun flogging an old Ford. Someone have an extra disk, please. Thanks for all your advise on this challenge. At the moment I have a matching-color bungee holding the hood nose down in place.