[brokenspoke]

Originally Posted by A model Thom

I modified my a engine to have a proper functioning pvc and ill be doing the same for the Burtz block that I'll be building for my mums sport coupe, I drilled a hole in the back of the block to take a pcv grommet (physically as clos to the opposite side of the engine as I could put it from the fill tube/ breather so the pcv can pull the fumes across the crankcase) and machined up a stand off tube to let the crankcase and valve chamber be able to breathe, the stand off tube was also higher than the oil level could go in the valvechamber to reduce the chance of oil draining through it, the set-up works really well, my town sedan doesn't smell fumey or burn oil


They are hard to make rhd with an oil filter, this is the set i made with my dad for my town sedan

Where do you pull fresh air from?