Re: Distributor machines
Ron,
Had a chance to hook up a dura spark 2 control module this morning. I used it on my Sun Distributor machine as my Allen is a late model unit that dont need the pulse tool.
I used a Chrysler electronic ignition ( in a buick distributor) and it worked fine on my machine....
The module was a 6 wire Ford with blue color code or a Dura Spark II unit.
Tie the red and white module wires together ( start and run on module) and hook distributor test lead on machine to these.
Ground the black module wire to machine ( Sun uses a seperate ground wire).
Then hook up the two pickup leads to the green and orange module leads.
You may need to switch the pickup leads but they work either way on my machine , the strobe should flash etc.....
The distributor triggers the module and the module triggers the strobe. As time permits i will try a GM HEI module but didnt have one handy this morning and you said you had a Ford one.....
Hope this helps.......
|