Re: Engine power
Mitch//pa: Have not done leak down test. Idle is a little rough, Spark OK, I connected the blower end of a Shop-vac to the tail tile then to the carb. I used soapy water to check for leaks at manifold.
gweilbaker: Distributor seats and no wobble.
Big hammer: I do not like the difference between 1-2 and 3-4. Something is wrong.
tbirdtbird: I agree a reground cam should be correct. But a rebuilt engine should also be correct. Since it is not correct I did not assume that anything was correct so I am trying to check everything. I am going to check the resistance using the hand crank with the plugs out. I will report my findings. Thanks
Bob
|