The Ford Barn - View Single Post

TJ · 05-16-2021, 07:21 PM

Drill the holes in the crossmember so the shocks will clear the tail pipe(s). Then measure center to center of the mounting points with the weight of the car on the suspension. With that measurement I can give you what shock to use.

05-16-2021, 07:21 PM	#2
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,035	Re: Rear tube shocks for 46 woodie wagon. Drill the holes in the crossmember so the shocks will clear the tail pipe(s). Then measure center to center of the mounting points with the weight of the car on the suspension. With that measurement I can give you what shock to use.