The Ford Barn - View Single Post

Mart · 01-28-2018, 04:05 PM

I used A Model A drag link on my 33 because it had a bolt on steering arm which is straight rather than the slightly angled forward stock arm. The Model A drag link is shorter than a 33/34 and does not put the steering on the sweet spot of the box in the straight ahead position. It was a bit out on mine and would be worse on a stocker. I replaced it with a made up adjustable drag link.

Mart.

01-28-2018, 04:05 PM	#21
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,744	Re: RHD Pitman arm I used A Model A drag link on my 33 because it had a bolt on steering arm which is straight rather than the slightly angled forward stock arm. The Model A drag link is shorter than a 33/34 and does not put the steering on the sweet spot of the box in the straight ahead position. It was a bit out on mine and would be worse on a stocker. I replaced it with a made up adjustable drag link. Mart.