Re: 11-A Distributor Thread Size
Quote:
Originally Posted by rockfla
NO expert BUT being a brass fitting/tube wouldn't it be a "NPT" or a National Pipe Thread because "Machine" threads do not "seal" so you couldn't seal the "vacuum" with a machine thread!!! MY "guess" would be a 1/8th NPT or 1/8 National Tapered Pipe Thread!!! AS I said....MY GUESS
|
The sealing required at this fitting would not be accomplished at/or by the 3/8-24 threads.
__________________
John
"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
|