Quote:
Originally Posted by Henry Floored
Thanks guys. Excellent ideas. Probably will drill and tap for set screw.
|
DO NOT USE A SET SCREW.
Use a screw with a head on it. Knowing how dumb things can happen, if it accidently falls thru the hole you're done. Spacer is 1/4 in. thick which maintains the same height as when using stock 53 Ford heads. Distributor is Unilite. Black mark is a weak reminder of where to reinstall the distributor. This is the short shaft distributor with cast iron cover. Peruse this thread.
https://www.jalopyjournal.com/forum/...reads.1144583/
Use a screw with a head on it.