Re: wet floor 30 A rumble seat area
This is for a '36, but I am sure you can come up with a similar idea, I wire brushed the rusty floor, then put on some heavy undercoating. Next I got a large sheet of aluminum and bent it to fit the area. I also added an aluminum back panel, not sure how the '30 is, but the '36 has a large open area that the water goes in and causes rust down by the bumper. There are more details but they are probably unrelated to the '30. Some day I hope to put an article together for the V8 Times on how I did all of this water proofing.
Steve in Denver
|