View Single Post
Old 01-11-2020, 02:58 PM   #13
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,537
Default Re: 59 AB Angle Drive Distributor

The right angle drive would be no different than the late style Flathead distributor rotation. Ford in Sweden made a similar right angle front mount that bolts to the early three bolt front cover. The mount from Sweden has the Ford script on it and looks very similar to the one pictured in post number 1. Any right hand rotation dist will work perfectly. Converting a distributor for the one I have from Sweden was easy. No gear was needed on the dist end instead the end of the shaft is an offset male tang that locates in the drives offset female slot. Just like the early Flathead front cover distributor drive but on a much smaller scale.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH

Last edited by Ronnieroadster; 01-11-2020 at 03:03 PM.
Ronnieroadster is offline   Reply With Quote