[webb452]

Per Les Andrews Blue troubleshooting book on page 2-5 you should have the following readings:

Measure ohms from (+) terminal to (-) terminal - 1.6 to 1.8 ohms

Measure ohms from (+) terminal to center (high tension) 6.7K to 10K ohms

Measure ohms from (-) terminal to center (high tension) 6.7K to 10K ohms

Measure ohms from each coil terminal (+ & -) to outer metal case of coil - Open Circuit

If any of these readings are wrong you have a defective coil.

Randy