The Ford Barn - View Single Post

Merc Cruzer · 07-30-2013, 10:16 AM

You have a model A block that you just pushed a rod through the side of it. You laser scan the block...then you go to a 3 D printer and produce the same block with the original stamps. That day is not so far off based on the technology we have today.

07-30-2013, 10:16 AM	#36
Merc Cruzer Senior Member Join Date: Jul 2010 Location: Conifer, Colorado Posts: 2,431	Re: Making Wood Plans available You have a model A block that you just pushed a rod through the side of it. You laser scan the block...then you go to a 3 D printer and produce the same block with the original stamps. That day is not so far off based on the technology we have today.