The Ford Barn - View Single Post

deuce_roadster · 06-23-2020, 10:42 AM

If the grooves inside the cone area are still present and the teeth have good sharp points where they engage, I would use what is there. If you have NOS OEM synchro rings then you wouldn't be gambling on the parts if you wanted to change.

06-23-2020, 10:42 AM	#2
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,800	Re: Do I put in new synchro rings If the grooves inside the cone area are still present and the teeth have good sharp points where they engage, I would use what is there. If you have NOS OEM synchro rings then you wouldn't be gambling on the parts if you wanted to change.