Quote:
Originally Posted by KULTULZ
Are the WHEEL HOUSING(s) on the car?
Below is an ILL of the car's lower sheet metal -
Look @ PN 27882. It is the inner and outer wheel-housings together as an assembly.
|
Wheel housings are on and in great shape. The one on the drivers side could be to protect the fuel filler since there is not on the pass side. This flap attaches to the inner rear sheet metal with screw and to the floorboard at the top to a L bracket welded to the floor. Neither of these are on the pass side. The drivers side is about 4 inches behind the wheel housing. May just make one if for no other reason then keeping road crap off the rear.