wrong / worn axle shims
Guten Abend!
About 3500 ml / <2 years ago I revised all the brakes. Since the rear brake drums were too loose on the axle cone, I used the thin spicer / cone / axle shim.
Today I installed new brake shoes because the old ones were still thick, but led to extreme fading because overharding, I think.
I noticed that the mounted spicers were crushed and crumbly.
Did I do something wrong with the assembly back then?
__________________
Beste Gruesse aus Deutschland,
Werner
Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
|