The Ford Barn - View Single Post - Toe-in Adj. tool

160B · 10-13-2012, 05:32 PM

Here are three photos of an alignment tool I built based on a design one of our club members came up with. Works great!!! I use masking tape on the tire and the edge of the tool. The ends of the alignment tool where it comes in contact with the tire are beveled so you get good contact with the tape on the tire. This is where I make my mesurement with a small scale.

hope this helps

10-13-2012, 05:32 PM	#2
160B Senior Member Join Date: Aug 2010 Location: Port Orchard, WA Posts: 1,498	Re: Toe-in Adj. tool Here are three photos of an alignment tool I built based on a design one of our club members came up with. Works great!!! I use masking tape on the tire and the edge of the tool. The ends of the alignment tool where it comes in contact with the tire are beveled so you get good contact with the tape on the tire. This is where I make my mesurement with a small scale. hope this helps Last edited by 160B; 10-13-2012 at 07:04 PM.