Quote:
Originally Posted by GeneBob
I fought the LED bulbs vs turn signal flasher for awhile. I finally added a brake light socket tied to my steering column with the left turn signal going through one of the bulb filaments and the right turn signal going through the other. The separate bulb contacts and filaments prevent cross talk in the turn signals. This added sufficient resistance to the circuit for the thermal flasher to function and lights up under the dash so I will not forget to cancel my turn signals. Kinda silly, but it worked.
|
That’s similar to the way the my car’s previous owner wired my car. He used a plain bulb in place of the dash light, and he had two wires (one for each tail light circuit) connected so that the dash light would flash every time the signal toggle was turned on. It worked great in the day, but it was annoying during the night (because of the placement of the bulb).
Sent from my iPhone using Tapatalk