The Ford Barn - View Single Post

ryanheacox · 06-12-2020, 07:22 AM

I just did this job. Had to put the new springs in a vise, compress them solid and then assemble. After that a good whack with a dead blow hammer got the rod end over the ball.

06-12-2020, 07:22 AM	#2
ryanheacox Senior Member Join Date: Apr 2013 Location: Northwest CT Posts: 1,092	Re: Tierod Ends I just did this job. Had to put the new springs in a vise, compress them solid and then assemble. After that a good whack with a dead blow hammer got the rod end over the ball.