The Ford Barn - View Single Post - Float-A-Motor Questions

Jack Shaft · 01-04-2021, 09:52 PM

Neil,I used the full set,front,rear and transmission, used a balanced flywheel and clutch assembly,static balanced rods and pistons to .5g..but the biggest thing I did really shouldn't matter.I installed a harmonic balancer to reduce main bearing wear with a stock crankshaft..as an added unexpected benefit, vibration at certain cruise rpm's was gone.

01-04-2021, 09:52 PM	#5
Jack Shaft BANNED Join Date: Dec 2019 Posts: 1,196	Re: Float-A-Motor Questions Neil,I used the full set,front,rear and transmission, used a balanced flywheel and clutch assembly,static balanced rods and pistons to .5g..but the biggest thing I did really shouldn't matter.I installed a harmonic balancer to reduce main bearing wear with a stock crankshaft..as an added unexpected benefit, vibration at certain cruise rpm's was gone.