The Ford Barn - View Single Post - Float-A-Motor Questions

alexiskai · 01-04-2021, 09:38 PM

The way I did it was to measure the total width of the mount, "biscuit-to-biscuit," with no tightening of the bolts, and then incrementally tighten the bolt until I was able to measure 1mm of compression in the biscuits, and then I stopped.

01-04-2021, 09:38 PM	#4
alexiskai Senior Member Join Date: Apr 2018 Location: Mebane NC Posts: 2,354	Re: Float-A-Motor Questions The way I did it was to measure the total width of the mount, "biscuit-to-biscuit," with no tightening of the bolts, and then incrementally tighten the bolt until I was able to measure 1mm of compression in the biscuits, and then I stopped.