The Ford Barn - View Single Post - Simple to make and use Toe-In gauge

larry harding · 12-13-2020, 08:18 AM

maybe i like things simple and crude, but here is what i did. a piece of 3/4 pvc with a cap on each end. tap one of the caps 1/4 20 and put in a screw 1 in. or more. put this in the front of the wheels and adjust the screw until it just touches. move the the back and the distance between the screw and the wheel is the toe in.

12-13-2020, 08:18 AM	#17
larry harding Senior Member Join Date: Sep 2015 Location: western n.c. Posts: 393	Re: Simple to make and use Toe-In gauge maybe i like things simple and crude, but here is what i did. a piece of 3/4 pvc with a cap on each end. tap one of the caps 1/4 20 and put in a screw 1 in. or more. put this in the front of the wheels and adjust the screw until it just touches. move the the back and the distance between the screw and the wheel is the toe in.