The Ford Barn - View Single Post

Patrick L. · 12-13-2020, 08:05 AM

Could be either. Try checking them for capacity.
Check condenser for an open when hot, same with coil.
So if your still using 6v then you need a 1.5 ohm coil. Condenser capacity should be in the 1.7-1.9 microfarad range. Neither coil or condenser should show open at any time.

Plus I think I'd check the whole primary circuit while you're at it just for peace of mind.

12-13-2020, 08:05 AM	#2
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Coil or condenser over heat Could be either. Try checking them for capacity. Check condenser for an open when hot, same with coil. So if your still using 6v then you need a 1.5 ohm coil. Condenser capacity should be in the 1.7-1.9 microfarad range. Neither coil or condenser should show open at any time. Plus I think I'd check the whole primary circuit while you're at it just for peace of mind.