Re: Simple to make and use Toe-In gauge
TJ, great post. Thanks. Neat tool.
The tow in needs to be measured at the same height front and back, thus the chains. It does not have to be at the same height of the hub but should be high enough to get a good reading.
If you adjust the camber, not easy on a Model A, or any other steering geometry, remember to check the tow in last as the other setting will change the tow in.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|