Re: Instrument Panel Light
If you have one contact on your connector that is positive and the other grounded, and the pins are opposite each other, then you can use a BA15D base. These bulbs are normally used in marine applications. An LED equivalent, available from Super Bright LED's is the part number 1142-CW12-G. This is a 12 volt bulb that uses 0.10 amps or 1.2 watts at 12 volts. It is advertised to last 30,000 hours. It will be bright but cool to the touch. See https://www.superbrightleds.com/more...ofit-car/1978/
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|