View Single Post
Old 12-30-2020, 01:48 PM   #13
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,485
Default Re: Clevis or Eye to A-23822 Brake Pin Clearance

Quote:
Originally Posted by johnbuckley View Post
anyone care to hazard a guess as to how long the stay within acceptable spec? 200 Miles of "normal" stop/start driving or 2000 miles?
John, I would carry your highest number out another decimal. If the pins are the higher quality ones made, and with the brake rods with an eyelet near the same size as the pin so the contact area between the two is greater, -and with lube on each pin, I would think you could mic pins after 20k miles and they would still hit within spec.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote