View Single Post
Old 10-01-2014, 02:21 PM   #24
billybronco1
Senior Member
 
Join Date: Dec 2012
Location: MA
Posts: 570
Default Re: Axial Play in Water Pump Shaft

Quote:
Originally Posted by billybronco1 View Post
I need to understand this pump end play more. My pump does not leak for short rides and not sure about long rides because I have not done that yet. I have almost a half inch end play if I slide the shaft back and forth. This does not seem right and I need to know what to do.

Also the car has a six volt alternator and I was wondering how much play should be in the fan belt - thanks
--------------------------------------------------------------------------
Well I pulled it apart to day to find the metal retainer seal on the water pump shaft had popped out that is why I had so much end play. I pounded it back in but I will also install the collar as well. I thought I saw the recommended spacing some place here but can't find it - was it .006 of end play in the shaft once collar is installed?

Funny thing someone mounted a collar on the other side that seem to do nothing.
billybronco1 is offline   Reply With Quote