The Ford Barn - View Single Post

PC/SR · 10-11-2019, 11:16 AM

I run 7-1 flathead for general driving and hill climbs on babbitt. No problems. The rod and main bearing journals are very wide for the engine size and have a lot of surface area. Lack of pressure oil is the limiting factor of the Model A, not babbitt. Conventional wisdom has it to not exceed 4000 rpm on the stock splash system (though some have). But for regular driving you do not need anywhere near 4K anyway.

10-11-2019, 11:16 AM	#8
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,278	Re: Max Compression Ratio I run 7-1 flathead for general driving and hill climbs on babbitt. No problems. The rod and main bearing journals are very wide for the engine size and have a lot of surface area. Lack of pressure oil is the limiting factor of the Model A, not babbitt. Conventional wisdom has it to not exceed 4000 rpm on the stock splash system (though some have). But for regular driving you do not need anywhere near 4K anyway.