Quote:
Originally Posted by hardtimes
Spec sheet says: 'C.H. 1.400'.
Dome height says: 0.500.
Net dome cc's- SPL
Piston weight says: 938 grams.
Note: The way designed, these Ross are same .032 popup (now) as stock . When placed side by side with STOCK model A piston, pins on both sit exactly opposite each other. The RINGS on the Ross are way down the dome compared to stock.
Hm, just realized that the old dude must have been going to use a LONGER rod to bring dome on Ross up.....if it were to be available to carve, eh ?
|
Or any combination of stroked crank with longer rods.
J