The Ford Barn - View Single Post

The Master Cylinder · 12-23-2019, 12:06 AM

It should be positioned just like this when #1 is at TDC (pin in the hole) timing lever full retard and points set at .020".

Picture courtesy of Tom Wesenburg.

12-23-2019, 12:06 AM	#2
The Master Cylinder Senior Member Join Date: Aug 2012 Posts: 886	Re: Rotor Position Question It should be positioned just like this when #1 is at TDC (pin in the hole) timing lever full retard and points set at .020". Picture courtesy of Tom Wesenburg. __________________ The Master Cylinder Enjoying life at the beach in SoCal... Last edited by The Master Cylinder; 12-23-2019 at 12:19 AM.