Quote:
Originally Posted by V8COOPMAN
WHY would ARCING the shoes to the diameter of the drums "result in the problem he is having"? And why confuse matters by talking about drums with "hub on the outside"? DD
|
If the shoes are too thick they won’t go over the drums even when the adjusters are as far in as possible. Arcing solves this problem (plus allowing for full contact of the shoe on the drum).
He said in the initial post he is having trouble fitting the drum over the shoes.
I am talking about the drums with the hub on the outside because in his initial post he said showed a picture of the hub on the outside and said “I understand theres 2 drum styles from the era,but I thought you could use either. Any insight would be great.”