The Ford Barn - View Single Post

jwmckenzie · 07-14-2021, 10:16 AM

The front two mains take a square 9/16" on the inside and 3/4 on the nuts outside, the rear main just need the 3/4 IIRC.

I think the 21/32 is for the rods, if they are still original nuts.

Just to be complete you will have to remove the valve cover to get to one of the nuts for the center main. So plan for that as well.

07-14-2021, 10:16 AM	#3
jwmckenzie Senior Member Join Date: Feb 2014 Location: Boston, MA Posts: 213	Re: Bearing Socket Size The front two mains take a square 9/16" on the inside and 3/4 on the nuts outside, the rear main just need the 3/4 IIRC. I think the 21/32 is for the rods, if they are still original nuts. Just to be complete you will have to remove the valve cover to get to one of the nuts for the center main. So plan for that as well.