Quote:
Originally Posted by Big hammer
It didn't line up right with the Zenith, why would it line up with the Tilly ?
Maybe the frame is sagging, body blocks bad ? To get by..... removing the rubber grommet inside the car just might work, the choke rod would rattle!
|
This is actually quite likely. I have found at least one body block crushed, so I'm in the process of getting the body off to address a few things. Once I get everything mounted back up, I'll double check.
Someone else mentioned if the crank hole is lined up. It is, so I'm not too worried there.
Best case scenario, it's the body on the frame wonky, I fix that and the Tilly should line up. I hadn't thought that it could be this.
Thanks guys!