Re: Cam Timing question for the experts on Isky 1007B
I tried it with the front cover on. Re verified TDC with piston stop, re zero'd Dial indicator and at .050 of valve lift (with zero lash) without the cover i got 0* or TDC with the cover and after resetting everything, it is actually 1/2* ATDC which is basically the same reading but it did slightly change 1/2* and is even further retarded from what it should be. The 3rd pic shows where it should be.
__________________
Life is hard, after all it kills you!
Last edited by Russco; 03-23-2012 at 04:07 PM.
|