The Ford Barn - View Single Post - Cam Timing question for the experts on Isky 1007B

Russco · 03-22-2012, 10:24 PM

Yes,checked and rechecked. TDC on the wheel is acurate. If the degree wheel was off the closing event would be off by the same amount as the opening event as with the centerline but the closing event is only off by 1* the centerline by 3-5 degrees depending on the method and the opening about 7-10*. Im fairly certain the cam is ground wrong or maybe the card is wrong but I dont think the card is.

03-22-2012, 10:24 PM	#9
Russco Member Join Date: May 2010 Location: Springfield IL Posts: 84	Re: Cam Timing question for the experts on Isky 1007B Yes,checked and rechecked. TDC on the wheel is acurate. If the degree wheel was off the closing event would be off by the same amount as the opening event as with the centerline but the closing event is only off by 1* the centerline by 3-5 degrees depending on the method and the opening about 7-10*. Im fairly certain the cam is ground wrong or maybe the card is wrong but I dont think the card is. __________________ Life is hard, after all it kills you!