View Single Post
Old 03-04-2021, 09:18 AM   #15
jason78613
Junior Member
 
jason78613's Avatar
 
Join Date: Oct 2020
Location: Cedar Park, TX
Posts: 20
Default Re: carb leaking gas, what did I do wrong?

Quote:
Originally Posted by Charlie ny View Post
Regarding #11....a V8 60 does not have a separate f/p stand....the stand is integral with the intake. Terry has good ideas as always but my offer works best if I can put
the patient on the table direct from the accident scene.
Charlie ny
Thanks Charlie!... I’m going to open the top of the carb once more to check that the valve/needle is seating correctly, and that the float is controlling the fuel correctly...

I’m hoping it’s an easy fix since it was working fine before I messed with it. Perhaps Terry’s note about a piece of rubber (or simmer other crud) getting stuck in the valve is the culprit.

if I can’t figure it out, I’ll be sending the pump and carb to you.
jason78613 is offline   Reply With Quote