The Ford Barn - View Single Post

duke36 · 08-13-2016, 04:20 PM

Another lacing ?. When installing the lacing, does the wider bead on the lacing face the polished shell surface or inside towards the motor as in the ebeling photo? Have seen it both ways. Also, made the rivet tool from a nut tack welded to an extra ch. lock pliers as per attached photo.

08-13-2016, 04:20 PM	#8
duke36 Senior Member Join Date: Jun 2015 Posts: 1,414	Re: Installation fo Shell Lacing Question Another lacing ?. When installing the lacing, does the wider bead on the lacing face the polished shell surface or inside towards the motor as in the ebeling photo? Have seen it both ways. Also, made the rivet tool from a nut tack welded to an extra ch. lock pliers as per attached photo. Last edited by duke36; 03-27-2017 at 10:18 AM.