The Ford Barn - View Single Post

Russell Reay · 09-22-2021, 07:23 AM

If I understand your situation correctly, there is no adjustment to 'aligned properly'. There is a flat face on the arm that fits tight against a corresponding flat face on the spindle. When the nut is tightened correctly there should be no adjustment possible. If I am wrong, a more knowledgeable person will log in.

09-22-2021, 07:23 AM	#2
Russell Reay Senior Member Join Date: May 2021 Location: NH/ VT Posts: 336	Re: Steering arms If I understand your situation correctly, there is no adjustment to 'aligned properly'. There is a flat face on the arm that fits tight against a corresponding flat face on the spindle. When the nut is tightened correctly there should be no adjustment possible. If I am wrong, a more knowledgeable person will log in.