View Single Post
Old 09-15-2021, 05:15 AM   #3
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,359
Default Re: Messed up D Nuts for header attachment

I had that happen on cabriolet. Welded up and re-tapped. Not easy
I used a bottom tap as the area is not deep.
I considered cutting out the front and feeding new d-nut and the patching. I could make that happen but didn’t…not out of the question.
Oldbluoval is offline   Reply With Quote