Quote:
Originally Posted by Walt Bratton
About 10 years ago we at Brattons started making our own inner tubes because we had issues with the tubes that were currently on the market. When we had one of the tubes analyzed we found out that those tubes were being made with a high percentage of recycled rubber, and the thickness was severely lacking. So when we had ours made we had these tubes made with 100% new rubber and much thicker for longer life. Since we have started making and selling our own tubes the failure rate has decreased. I know the tubes are a bit more expensive than the others on the market, but we have had much better success with them.
|
Hello Walt. Glad you have been showing up here. I had gotten some bad tubes That came from some guys in our club, I had also ordered some from another supplier because a member was ordering . My bad tubes were about 3- 4 years ago I would mount them and about 2-5 days they were flat all the tubes were slit down the seams, rotten I guess. I then started buying all my tubes from BRATTON and haven't had a flat in 3 years I drive my car about 13,000 miles per year and more.NOT SAYING ALL THIS BECAUSE WALT IS HERE JUST THE FACTS. have fun modelAtony tony white Lafayette,LA