Quote:
Originally Posted by BRENT in 10-uh-C
Mark, to my knowledge, the only person that is making tubes for Model-A tire sizes is Coker.
Most problems that I am finding is the tube stem is detaching. The way to correct this problem is to install metal valve stems. If the inside of the wheel is free from pits and shaft edges, and if the tube is properly installed with plenty of Talc, then I haven't experienced problems.
|
Brent EXACTLY what happened to me...thanks for that
mark
__________________
Mark Maron
Ill., Region MARC & MAFCA
MARC JSC Member MAFFI Trustee
National Facebook Admin.
https://www.facebook.com/groups/MARC.group/
A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe